Due to fitment issues with some vehicle makes and models outside of the US, we will only be shipping within the USA.
Sprint Booster Power Converter V3
including SRT 6
Find more CHRYSLER Options Here
|• Eliminates throttle lag||• Sport & Race mode|
|• Instant acceleration response||• 30-Day Money-Back|
|• Increases performance|
By side-stepping your FACTORY SET throttle, Sprint Boosters give you direct "throttle control."
And to be clear, it’s not making more horse-power, it’s making your Chrysler Crossfire more responsive by drastically improving your Chrysler’s throttle response time and giving you INSTANT GO POWER.
Easy Installation On Your Chrysler Crossfire
It's as simple as plug-n-play in your Chrysler Crossfire! No special tools. No expertise. Estimated install time is 10-15 minutes.
1) Remove the harness connector from the accelerator pedal.
2) Plug the Sprint Booster Connector (red tab) into the pedal.
3) Attached the harness connector to the Sprint Booster Connector.
Secondary Features - Valet Mode and Pedal-Lock
When in Valet mode Sprint Booster limits the acceleration of the vehicle by 55 % – 65% – 75% (comes in 3 selectable levels). The Valet Mode is activated/deactivated through a 3 digit PIN. By limiting the acceleration there will be a significant reduction in the vehicle’s performance (Power and Torque).
The Pedal Lock mode provides extra protection against unauthorized vehicle use. The driver can deactivate the acceleration ability of the vehicle when it’s stationary through a 3 digit PIN. When Pedal lock is enabled the acceleration gets disabled and the vehicle stays on idle until you enter the correct PIN.